# Specifications


> The standard Screenly Player is Raspberry Pi based, shows content at up to 1080p, and has no TPM or Secure Boot.
## What it does

| | |
| --- | --- |
| Platform | Raspberry Pi based |
| Resolution | Up to 1080p |
| Wireless | Follows the Raspberry Pi generation it was built on |
| WPA3 | No |
| TPM and Secure Boot | No |
| Power over ethernet | Possible, with a HAT or a splitter |

## Wireless

The radio follows the Raspberry Pi generation the player was built on.

| Generation | Bands |
| --- | --- |
| Raspberry Pi 5 | 2.4 and 5 GHz |
| Raspberry Pi 4 and 4B | 2.4 and 5 GHz |
| Raspberry Pi 3B+ | 2.4 and 5 GHz |
| Raspberry Pi 3B | 2.4 GHz only |

WPA3 is not available on this model. It needs a Player Max.

WPA2-PSK and 802.1X both work. See [Connect on an enterprise network](/docs/screenlyos/networking/guides/connect-on-an-enterprise-network/).

## Displays

How many screens one player drives depends on its Raspberry Pi generation: a Pi 4 or Pi 5 drives two through its micro HDMI outputs, and a Pi 3 drives one. Both show the same picture. See [Driving more than one display](/docs/screenlyos/overview/multiple-displays/).

## What it does not do

No 4K, and no TPM or Secure Boot. Those are properties of the board, so no software setting adds them. For any of the three you need a [Player Max](/docs/screenly-players/models/player-max-mk3/).

## Power

Use the official Raspberry Pi power supply for the board. Third-party supplies deliver power inconsistently, which shows up later as a screen that reboots or freezes at random, and reads as a software fault.